VENTILATION WITH HEAT RECOVERY FOR INSTALLATION ON THE WALL

VENTILATION WITH HEAT RECOVERY FOR INSTALLATION ON THE WALL

Energy-efficient residential ventilation for installation on the wall

Category: Tag:

Description

A good indoor climate determines the health and well-being of the entire family and protects buildings and interior from moisture damage.

The HCV range of residential ventilation units has built-in RH sensors automatically adjusting air volumes in relation to the relative humidity in the home. This means that there is no need to wire the unit up to external sensors.

The HCV units are constructed with a new, light-weight aluminium counter flow heat exchanger developed and manufactured by Dantherm, which has an efficiency level of up to 95%.

The integrated control panel allows the user to adjust individual default settings such as manual or automatic control of ventilation speed. With an optional wireless remote control the user gets access to further control options such as away and night operation.

Energy efficiency class A or A+
The standard versions of HCV/HCH are rated as energy efficiency class A. By connecting an optional CO2 sensor in the kitchen-dining room or the bedroom, the HCV/HCH units will obtain energy efficiency class A+. The CO2 sensor is connected to the MVHR unit by means of the accessory control (HAC 1).

HCV 4 Low Sound
HCV 4 residential ventilation unit is available in a special Low Sound version. This extremely quiet version is fitted with extra sound-absorbing material. HCV 4 Low Sound is ideal for flats with particularly demanding installation requirements. The sound level for HCV 4 Low Sound is lower than 30 dB.

A good indoor climate determines the health and well-being of the entire family and protects buildings and interior from moisture damage.

The HCV range of residential ventilation units has built-in RH sensors automatically adjusting air volumes in relation to the relative humidity in the home. This means that there is no need to wire the unit up to external sensors.

The HCV units are constructed with a new, light-weight aluminium counter flow heat exchanger developed and manufactured by Dantherm, which has an efficiency level of up to 95%.

The integrated control panel allows the user to adjust individual default settings such as manual or automatic control of ventilation speed. With an optional wireless remote control the user gets access to further control options such as away and night operation.

Energy efficiency class A or A+
The standard versions of HCV/HCH are rated as energy efficiency class A. By connecting an optional CO2 sensor in the kitchen-dining room or the bedroom, the HCV/HCH units will obtain energy efficiency class A+. The CO2 sensor is connected to the MVHR unit by means of the accessory control (HAC 1).

HCV 4 Low Sound
HCV 4 residential ventilation unit is available in a special Low Sound version. This extremely quiet version is fitted with extra sound-absorbing material. HCV 4 Low Sound is ideal for flats with particularly demanding installation requirements. The sound level for HCV 4 Low Sound is lower than 30 dB.

Accessory control for energy class A+

Accessory control HAC 1:

Accessory control with connection of heating coils, cooling coils, geothermal collector, duct damper, stop function, fire thermostat, CO2 sensor, hygrostat and alarms, incl. 5 m cable.

The HAC accessory control covers most requirements if the ventilation unit is to be connected to a Building Management System.

Read here for a more detailed description of connection to a building management system

Included in the Energy Efficiency Class A+ kit.

HCV remote control

Wireless remote control, HRC 2:

The remote control gives access to: 

Manual operation
Demand-controlled operation
Choice between 12 different week programs
Away operation when you are absent for a longer period
Night operation
Reading of outdoor temperature, supply and extract temperature, room temperature, relative humidity and CO2 level
Installer menu for adjustment and fault-finding

Waterkit

Siphon trap kit:

Siphon trap kit including 2 m 3/4″ armed hose and glands. 

Varmekabel

Heat cable:

Heat cable, 230 V, 10W/m, incl. 5oC thermostat for frost protection of drain. Length 3 m.

Kommunikationskabel

Communication cable:

Communication cable with plug for connection of HCP 4 control panel to the HCV/HCH ventilation unit. Length 30 m.

 Ophængningsskinne

Wall mounting rail:

Mounting rail for plan installation of HCV behind the door in a cupboard. With this rail the installation depth will be reduced. Insulation tape (50×3 mm), vibration damper and U-profile (19×5 mm) are included.

Dimensions 526 x 30 mm.

Strømforsyning

Power supply:

Power supply 230 V AC – 24 V DC for duct control. The power supply is to be mounted in the HAC 1 accessory control if the ventilation unit is controlling the duct damper.

Hygrostat

Hygrostat:

Sauter 120 R001 hygrostat measures the humidity in wet rooms. The hygrostat is connected to the HAC 1 accessory control. The ventilation unit is controlled in accordance with measured humidity.

CO2 sensor for energy class A+

CO2 sensor:

The CO2 sensor is connected to the HAC 1 accessory control, if the air change in a given room has to be controlled in accordance with the CO2 level.

Included in the Energy Efficiency Class A+ kit.

Elektrisk for og eftervarmeflade

Electric pre- and after-heating coils:

Electric pre- and after-heating coil, 0-10 V controlled by the HAC 1 accessory control. The heating coil is controlled by a stepless regulation. The electric heating coils are designed for installation in the supply and outdoor air ducts. The heating coil is provided with duct connections with nipples and rubber sealing gasket.

The heating coil is not suitable for outdoor installation.

The control current is connected to the accessory control HAC 1. Connection to supply voltage (230 V) is made separately.

Heating coils are supplied with duct sensors.

 

 Elektrisk for og eftervarmeflade direkte styret

Electric pre-/after-heating coils, direct control:

This electric pre-/after-heating coil is controlled directly by the built-in thermostat.

Heating coils are supplied with duct sensors.

 Water heating coil

Servomotor 2way water valve  VAC trafo

After-heating coils for water:

The water heating coil includes 2RR heating coil, 2-way water valve, 0-10V servo motor, 230/24 V AC trafo, duct sensor and tube sensor for frost protection.

The after-heating coil is controlled by the accessory control HAC 1.

 Filtre

Filters:

Two filter sets are available:

G4 filter set with two G4 standard filters.

F7 pollen filter set with one G4 standard filter and one F7 extra-fine filter for filtration of smaller particles, such as pollen. 

PHI certificats

ErP documentation Energy Class A

ErP documentation Energy Class A+