The Rubic UNA system is the latest and the most advanced version of the monitoring system which controls independent fittings of emergency and evacuation lighting. Each control unit can control up to 4000 fittings by using MPU250 submodules. Submodules communicate with the central RUBIC UNA via LAN. Due to the connection through the LAN it is possible to use the Wi – Fi connection between the submodules.

Category: Tag:


RUBIC UNA has a touch panel with graphical, intuitive menu. This allows you to configure the system in a simply and easy way without the use of SmartVISIO application.
Due to applied technical solutions, we have eliminated the importance of polarization of connecting the communication bus directly to:
• RUBIC UNA central unit
• MP UNA submodules
• RS address modules

By uploading special license into RUBIC UNA, system can control a dynamic illumination which is an innovative system controlling escape route depanding on situation present on facility. Due to connection with fire alarm systems, marking allows to fast recognition of safe escape route. Rapidally changing conditions such as smoke or fire require system which allows fast and dynamic change of the safest escape route.

The most important parameters :

  • Monitoring up to 500 emergency fittings
  • The maximum length of a single bus is 1200 m
  • LEDs signalling status of the system
  • Automated testing
  • Internal memory stores the reports of emergency lighting system in accordance with EN 50172
  • Night operation mode
  • Posiibility to test the fittings individually or in a group
  • Internal battery supporting power supply of the central unit
  • RJ45 connector for direct communication with any computer via Ethernet
  • Individual IP address
  • Preview of the system via any web browser
  • Continuous communication with the fittings in the system
  • Management and visualization of the system using dedicated software SMART VISIO

Each RS address module has its own individual number / address. Addresses are assigned by the factory therefore no additional devices, such as address programmers, are required.

RUBIC UNA - konf

DES is a dynamic illumination system which consists of escape route luminaires, control panel and central power system. Dynamic luminaires may display up to ten various characters depanding on programmed scenario. Due to application of DES system it is possible to show proper escape route in case of hazards, eg. fire hazard.


mpu250-zdjecie en


• Submodules mounted on a DIN-3 rail (TH35)
• Monitoring of up to 250 luminaires
• Ethernet connection for LAN communication
• Service pin and Reset button
• Freely programmable IP address
• Built-in uninterruptible power supply unit
• LED indicator of battery charging



• Compatible with LED light sources
• Switching to emergency mode
• Operating on Ni-Cd, Ni-MH or LiFePO batteries 4
• LED status indicator included



• designed for operation with DES panel and DES luminaires
• comunication with central unit via RS 485 protocol
• up to 6 MWB modules can be connected to the submodule
• 8-32V DC supply, require to use additional uninterruptible power supply unit
• up to 12 potential-free inputs
• possibile to change single input modes: 1k; 4,7k; 22k; 47k; NC, NO
• indicated status of each single input on central unit
• assembly on DIN rail (TH-35)



• designed to operate with MWB modules
• 230 V AC power suplly
• Internal battery for uninterruptible operation
• possibility to supply up to 2 MWB
• assembly on DIN rail (TH-35)
• 10 – 14,6 V DC output voltage

BM DYN - zdjęcie


• designed to operate with DES panel and DES luminaires
• comunication with central unit via RS 485 protocol
• displays up to 10 signs
• LED indicator included for any comunication and operation malfunction
• preset scenario activation by 230V control input
• automatic detection of connected light source
• compact housing
• posibility to connect up to 250 modules to the sub-module