HELIOS LED

Series of escape light fittings HELIOS LED is created by three unique products, each one developed with different LED light source characteristic. Thanks to this diversity HELIOS LED can be easily tailored to design the most optimal installation.

Line of HELIOS LED:

HWM – designed for low and medium mounting heights;
HWD – designed for high mounting heights;
HSP – designed for points that require a large volume of the light beam in emergency mode.

Extremely robust housing with IP42 or IP65 degree of protection and a high protection against mechanical impacts (IK08), ensures long life even under the toughest conditions. An additional option is to adapt the fitting to work in the low temperatures: up to -25˚C.
HELIOS LED fitting can be configured in all possible ways: suitable for central battery system, central monitoring system, with an auto-test function or as a standard self contained option.
Environmentally-friendly Ni-MH batteries and modern electronic impulse charger with a „stand-by” mode ensures the extremely low power consumption and maximum charging time of 12h only.

Description

TECHNICAL DATA

MATERIALS:
White polycarbonate body
Transparent or opal polycarbonate cover
MOUNTING:
Surface (wall, ceiling)
POWER SUPPLY:
Self contained – 220÷240VAC/50÷60Hz
Central battery – 220÷240VAC/50÷60Hz; 176 – 275VDC
Central battery FZLV – 24VDC
LIGHT SOURCE:
1W, 2W, 3W, 3x1W, 6x1W power LED
CHARGING:
BASIC: max. 24h
STANDARD: max. 24h
PREMIUM: max. 12h; energy-saving electronic charger
AUTONOMY AND BATTERIES:
BASIC: 1h or 3h, Ni-Cd 3,6V batteries
STANDARD: 1h or 3h, Ni-Cd 3,6V batteries
PREMIUM: 1h or 3h, LiFePO₄ 6,4V batteries
INSULATION CLASS:
II or III
IP RATING:
IP42 or IP65
AMBIENT TEMPERATURE:
Self-contained:
t_a: 0°C ÷ 40°C
t_a: -25°C ÷ 40°C – together with heater for low temperatures
CB:
t_a: 0°C – +50°C
OPTIONS:
SE – non maintained
SA – maintained (with an option of connecting as non-maintained)
PT – manual test button
AT – autotest
RU – Rubic UNA central monitoring
RW – Rubic UNA Wireless central monitoring
FZLV – central battery FZLV 24VDC
CB – central battery
ADDITIONAL INFORMATION:
LED indicator signalizes mains power supply and battery charging
Deep discharge protection
Optional adaptation of the fixture for low temperatures up to -25°C
Protection against mechanical impacts – IK08
III class of insulation of FZLV version

DIMENSIONS

ORDERING CODE

HWM – fixture Helios IP65, assembly altitudes: 2,5 – 10 m
HWEM – fixture Helios IP42, assembly altitudes: 2,5 – 10 m
HWD – fixture Helios IP65, assembly altitudes: 8 – 14m
HWED – fixture Helios IP42, assembly altitudes: 8 – 14m
HHP – fixture Helios IP65 6x1W assembly altitudes: 2,5 – 14m
E – electronic gear for BASIC self-contained fittings
C – electronic gear for STANDARD self-contained fittings
B – electronic gear for PREMIUM self-contained fittings
F – electronic gear for central battery fittings
Z – electronic gear for addressable central battery fittings
SE – non-maintained
SA – maintained (with an option of connecting as non-maintained)
PT – manual test button
X – fitting without additional options
AT – autotest
RU – RUBIC UNA central monitoring
RW – RUBIC UNA Wireless central monitoring
CB – central battery version
ADP – central battery with ADP address module – SMART technology
CBS – central battery for circuit monitoring
ADE – central battery with ADE address module
FZLV – central battery FZLV 24 VDC
TR – transparent polycarbonate cover
OP – opal polycarbonate cover