Alimentation solaire et pile à combustible au méthanol pour appareils LiDAR
3 options :
Solaire et pile à combustible (standard)
Solaire seul (pour les pays ensoleillés entre 40°N et 40°S)
Pile à combustible seule (pour une mobilité maximale)
Produit sur mesure pour tous les modèles LiDAR
L’alimentation solaire et pile à combustible au méthanol est spécialement conçue pour les appareils LiDAR.
Cette alimentation est recommandée pour tous les climats, à l’exception des conditions arctiques avec peu d’ensoleillement.
Le système associe une puissante pile à combustible EFOY Pro au méthanol à deux modules solaires de 460 W (4 en option). Le système est équipé de deux cartouches de pile à combustible de 28 litres.
La pile à combustible EFOY Pro est équipée d’une plateforme de surveillance web EFOY Cloud. Des alarmes, telles que le niveau de carburant bas ou la tension de batterie faible, peuvent être configurées. Ainsi, le système informe automatiquement par e-mail ou SMS en cas de déclenchement d’alarme.
De plus, nous contrôlons la sortie d’alimentation via un relais marche/arrêt déclenché sur le cloud Victron.
| Summary | |
|---|---|
| Energy system enclosure, incl. assembly and wiring | |
| Hybrid Power Pack, including • Flight case with 130 Ah 24V Battery, • EFOY Pro2800 fuel cell with FM2 fuel manager • 2 x 460 W Solar Modules • PV frame for 2 x 460 W system Unistrut steel framing with all accessories, cable extension, connectors |
|
| Remote control through Victron cloud with load control to switch the power supply ON and OFF |
| Characteristic | Description |
|---|---|
| Total output peak power | 200 W |
| Output voltage | 24 VDC |
| Battery bank | 130 Ah / 24 V (two Victron Lead GEL battery batteries 130 Ah/12 V each) Victron low voltage battery protector |
| Solar supply | |
| Solar supply | 2 solar modules @ 460 – 490 W / 24 V (Total: 920 – 980 W) PV Solar array extension cable with MC4 connectors and splitters PV frame for 2 x 460 W system Unistrut steel framing4 solar modules instead of 2 is possible as an option (with a Unistrut framing for 4) Solar charger: Victron SmartSolar 150/35 charging controller |
| Fuel cell | |
| Fuel cell reference | EFOY Pro2800 fuel cell with FM2 fuel manager |
| Power output | 125 W |
| Nominal voltage | 12/24 V DC |
| Fuel cell cartridge | 2 x 28 liters Methanol, M28 cartridge + FM2 adapter Fuel Sensor FS2 |
| Operational panel to display status Modem 4G protection box Remote monitoring set: Industrial router (no SIM card) EFOY cloud monitoring WEB platform |
|
| https://www.efoy-pro.com/en/efoy/efoy-efoypro/ (Dimensions etc.) |
|
| Nominal Methanol consumption | 0.9 liters/kWh |
| Classification of Methanol | Index: 603-00100-X; EINECS, ELINCS, NLP: 200-659-6; CAS 67-56-1 |
| Operating temperature | -20°C … +40°C |
| Total dimensions | Power Pack 120 x 80 x 51 cm (LxWxH) Solar Module: 100 x 200 cm (LxWxH) |
| Total weight | Approx. 216 kg |
