Vibro-mini: Anti-vibration Rubber Support for Light Weight Machinery
Antivibration solution for light weight machinery. Can be used for antivibration mounting or hanging of ceilings or HVAC equipment.
caused by low weigh machines. It is a great solution for the anti-vibration support of low axial
loads.
The Vibro-mini, can be fixed with an anchor on the floor, be suspended on the ceiling through anchors and also be placed on a metal base with a passing through screw of Μ8 mm.
Due to its pioneer design, the Vibro-mini gives big deflection when loaded. As it’s known – LARGER DEFLECTION MEANS BETTER ANTI-VIBRATION RESULTS.
Pay attention for:
- The anchor rod of the suspension must be perpendicular.
- The passing through screw prevents the machinery from falling in the event of elastic part destruction. (Fail Safe)
- The weight of the machinery must be applied on the top surface of Vibro-mini.
APPLICATIONS
- MACHINERY ANTIVIBRATION SUPPORT
- SUSPENSION OF MACHINERY (Air Conditioning Units, Ventilators e.t.c.)
- SUSPENSIONS OF SOUND INSULATION
- CEILINGS MADE OF GYPSUM BOARD
ATTENTION: Do not screw the holding screw too tight .
The screw and the nut must not compress any of the elastic parts.
It is important not to forget to put the Vibro-mini’s neck through the hole and to place it on the ELASTIC WASHER and on the metal base.
DYNAMIC CHARACTERISTICS
Load range 8 – 50 daN
Natural frequency over 15 Hz.
